Ford Ranger NextGen Accessories — The Complete Guide for 2022+

Ford Ranger NextGen Accessories — The Complete Guide for 2022+

UniUte |

The Ford Ranger NextGen is Australia's best-selling ute — and for good reason. Since its arrival in 2022, the RA-generation Ranger has raised the bar on interior quality, capability, and safety in the dual-cab segment. If you've got a NextGen Ranger and you're ready to fit it out, this guide covers every UniUte accessory purpose-built for the Ford Ranger NextGen RA 2022+, from covers and canopies through to storage and tailgate upgrades.

Ford Ranger NextGen Fitment — What You Need to Know

The NextGen Ranger (RA, 2022+) has different tub dimensions to the outgoing PX/PX2/PX3 generation (2012–2022). Accessories designed for the older Ranger will not fit the NextGen correctly. All products in this guide are purpose-built for the Ford Ranger NextGen RA 2022+ dual cab. Suits XL, XLS, XLT, Sport, Wildtrak, Raptor, and all other NextGen grades unless stated.

Roller Shutters — Security and Weatherproofing

UniUte offers both manual and electric (EGen2) roller shutters engineered specifically for the NextGen Ranger tub. Interlocking aluminium slats lock across the full tub width, retract fully into a canister at the cab end, and T-track side rails allow ladder racks and crossbars to mount directly to the shutter.

  • Manual or electric (EGen2 button open/close)
  • 100% tub access when open, lockable at any position
  • 4 integrated drain channels and LED interior light strip
  • T-track rails for crossbars and ladder racks
  • Clamp-on installation, no drilling

👉 Shop the Manual Roller Shutter for Ford Ranger NextGen 2022+

👉 Shop the Electric Roller Shutter for Ford Ranger NextGen 2022+

Hard Lids — Tri-Fold and Quad-Fold

UniUte offers both tri-fold and quad-fold hard lids for the NextGen Ranger. Rated to 250 kg, aluminium panels fold forward in sections, flush fit with the tub rails, installs in under 10 minutes with no drilling.

👉 Shop the Tri-Fold Hard Lid for Ford Ranger NextGen 2022+

👉 Shop the Quad-Fold Hard Lid for Ford Ranger NextGen 2023+

REVOLVER Hard Rolling Tonneau

The HR REVOLVER for the NextGen Ranger combines security with a premium low-profile look. Aluminium slats roll open from the rear, lockable at any position, fully weathersealed, matte black finish.

👉 Shop the REVOLVER for Ford Ranger NextGen 2022+

Soft Tonneau Covers

UniUte offers both a soft roll-up clip-on and a soft tri-fold tonneau for the NextGen Ranger. Lightweight, easy-to-fold tub protection at a lower price point.

👉 Shop the Soft Roll-Up Tonneau for Ford Ranger NextGen 2022+

👉 Shop the Soft Tri-Fold Tonneau for Ford Ranger NextGen 2022+

Fibreglass Canopy

UniUte's fibreglass canopy for the NextGen Ranger is precision-moulded to the RA tub dimensions. Factory-fitted appearance, paintable for colour matching, full stand-up interior height, rear barn door with gas-strut assist, sliding side windows, 100 kg roof rails.

👉 Shop the Fibreglass Canopy for Ford Ranger NextGen 2022+

Stainless Steel Canopy

For maximum durability on demanding worksites, the stainless steel canopy for the NextGen Ranger is built from 1.5 mm steel with gullwing doors, tinted glass, and 150/400 kg roof rail ratings.

👉 Shop the Stainless Steel Canopy for Ford Ranger NextGen 2022+

Sliding Tray

The UniUte sliding tray for the NextGen Ranger bolts to the tub floor and extends fully out the rear. Rated to 300 kg (plastic) or 400 kg (aluminium). Ideal for tradies, campers, and 4WD tourers.

👉 Shop the Sliding Tray for Ford Ranger NextGen 2022+

Swing-Out Tool Box

The swing-out tool box for the NextGen Ranger mounts to the side of the tub below the rail and swings open 180 degrees for instant access. Lockable, weatherproof, tub floor stays completely clear.

👉 Shop the Swing-Out Tool Box for Ford Ranger NextGen 2022+

ProLift Tailgate Assist

The ProLift for the NextGen Ranger uses a gas strut to slow the tailgate from dropping under its own weight. Single-handed controlled lowering, bolt-on with no drilling.

👉 Shop the ProLift Tailgate Assist for Ford Ranger NextGen 2022+

Tailgate Central Locking

Integrate the NextGen Ranger's tailgate into the central locking system — lock and unlock from the key fob along with the rest of the vehicle.

👉 Shop the Tailgate Central Locking for Ford Ranger NextGen 2023+

Tub Mat

Custom-fit tub mat cut to the exact dimensions of the NextGen Ranger tub. Heavy-duty rubber with raised edge lips, anti-slip surface, and sidewall coverage.

👉 Shop the Tub Mat for Ford Ranger NextGen 2022+

Recommended Setups for the Ford Ranger NextGen

The Tradie Ranger

Electric roller shutter + swing-out tool box + tailgate central locking + ProLift. Maximum security, fast tool access, weatherproofed, controlled tailgate every time.

The 4WD Ranger

Electric roller shutter + sliding tray + tub mat. Full weatherproofing, pull all your gear out the back without climbing in, tray rated to 400 kg.

The Work Ranger

Fibreglass or stainless steel canopy + swing-out tool box + tailgate central locking. Full enclosed height, tub protected, tailgate secured.

The Lifestyle Ranger

Quad-fold hard lid + tub mat + ProLift. Clean flush look, 250 kg on top, controlled tailgate.

👉 Browse the full Ford Ranger NextGen accessories range at UniUte

Questions about fitment? Contact the UniUte team in Moorabbin, VIC — we ship Australia-wide.

Leave a comment

Select your vehicle