Ute Roller Shutters, Manual & Electric Covers

Manual roller shutters use a pull strap to roll the cover open and a spring-loaded mechanism to close — simple, reliable, and no wiring required. Electric roller shutters use a 12V motor with a one-touch remote control, opening and closing the shutter without you touching the tub. Both options use the same aluminium slat construction and weather seals, so the choice usually comes down to budget and how often you access the tray.

For touring builds, the difference comes down to dust sealing and weather resistance — and both manual and electric shutters perform equally well thanks to the brush seals along the rails and rear closure. If you're running a roof platform or tonneau-incompatible setup, a roller shutter pairs well with sports bars and a tub rack. For full off-road builds with roof-top tents, a stainless or fibreglass ute canopy is usually the better fit since shutters aren't load-rated for RTTs.

For most tradies, an electric roller shutter earns its premium within a few months — one-touch remote access means you're not putting tools down to roll the cover, and the secure internal lock means tools stay safe on-site. Tradies on tighter budgets get virtually identical security, weather sealing and theft protection from a manual roller shutter .

Roller shutters give you the most flexible tub access — full-open, half-open, fully-closed in seconds. Hard lids are stiffer and stronger for sitting weight on but don't open in stages. Tonneau covers (soft) are the cheapest but offer the least security and weather protection. Read our full cover comparison guide for a side-by-side breakdown including pricing, security, and which suits your build.

UniUte manual roller shutters start from $1,249 AUDand electric roller shutters from $1,700 AUD, for popular dual cab models like the Hilux, Ranger NextGen, D-MAX, Amarok and Triton. Pricing varies slightly by vehicle tub size and trim level, and accessories like replacement straps or central locking integration are priced separately in our shutter accessories range.

Brands like HSP, Mountain Top and OCAM retail through dealer networks and 4WD shops, which adds 20–35% in distributor and dealer markup to every shutter sold. UniUte is a specialist supplier — we deal direct with the buyer, which lets us offer the same premium aluminium slat construction, the same weather sealing and the same lock hardware at a direct-from-supplier price.

We fit roller shutters in-house at our Melbourne workshop and ship Australia-wide to your local installer if you're interstate. Manual shutter installs take around 2–3 hours, and electric shutters take 3–4 hours including the 12V wiring and remote pairing. Get in touch to confirm fitment options for your postcode.

No. UniUte roller shutters mount using bolt-on clamps — no chassis drilling, no permanent modifications. For electric shutters, the 12V wiring taps from an accessory circuit rather than the main loom, so the factory vehicle warranty stays intact. The shutter itself is covered by its own manufacturer warranty.

We carry roller shutters for popular Australian utes including Toyota Hilux, Ford Ranger NextGen and Raptor, Isuzu D-MAX, Mitsubishi Triton, Mazda BT-50, Volkswagen Amarok, Nissan Navara, GWM Cannon and BYD Shark 6. Fitment varies by vehicle generation, tub setup and existing accessories, so check the product page or contact us with your make, model, year and tub accessories before ordering.

Yes. Roller shutters are bolt-on to the tub rails, so they can be removed cleanly without damage to the tub or tie-down points — practical for resale or transferring to a compatible next vehicle with the same tub size. Some swaps may need a new fitment kit if the rail profile differs between models.

Roller shutters are low-maintenance — rinse with water after off-road or coastal driving to clear grit from the slat tracks, and lubricate the side rails with a dry silicone spray every 6–12 months to keep the rolling action smooth. Avoid pressure-washing the motor housing on electric units. Replacement parts including winder boxes, straps and remotes are available if anything needs servicing down the track.

Yes. Many UniUte electric roller shutters support central locking integration — the shutter locks and unlocks together with the vehicle's tailgate using the factory key fob, which is a popular tradie upgrade for one-touch site security. Manual shutters use a key-operated internal latch as standard. Ask us about your specific vehicle when you get a quote.