1 17
FORD RANGER  |  SKU: RC1-FORD

HERO Lid Manual Roller Shutter for Ford Ranger NextGen 2022+

Fits Ford Ranger NextGen 2022+
$350.00 off
New arrival
$1,350.00 AUD $1,700.00

Pickup & fitment available at UniUte Store 37A Capella Crescent, Moorabbin, VIC

Usually ready in 2 hours

HERO Lid – Premium Manual Roller Shutter for Ford Ranger NextGen

The HERO Lid is UniUte's premium manual roller shutter, precision-fitted to the Ford Ranger NextGen tub. Where a soft or tri-fold cover flexes and rattles, the HERO Lid brings the look and rigidity of a hard lid with the simplicity of manual operation — no motors, no wiring, just smooth, one-hand rolling every time you open the tub.

Built Like a Hard Lid, Not a Cover

  • Reinforced aluminium panels: Thick, semi-curved roller leaves ride on heavy-duty side rails for a rattle-free ride.
  • Compact front canister: A slimmer canister keeps more usable tub space in front of the bulkhead.
  • Cyber Look finish: A rust-free, die-cast aluminium lock handle and edged corner end caps give the NextGen Ranger a sharper tub line.

Weatherproofing That Matches a Hard Lid

  • No visible screw heads: A clean, seamless finish stops water tracking in through fastener points.
  • Upgraded drainage: Larger-diameter drain hoses handle heavy Australian downpours without backing up.
  • Flush flat last panel: A flat-edge final panel seals tight against the tailgate.

Patented Convenience

  • 2-Way Control: Open and close from above the tub or underneath it.
  • Under-lock switch: A hidden lock switch keeps the lock line clean.
  • Flush-mount LED light: One-touch LED lights the tub without eating into cargo space.

Precision-fitted to the 2022+ Ford Ranger NextGen double cab tub, including Raptor, the HERO Lid bolts straight to the factory tub rails — no drilling.

Want remote, hands-free operation instead? See the Electric Roller Shutter for Ford Ranger NextGen. Already run a factory sports bar? The Sports Bar Adaptor Kit lets you keep it. Load-carrying accessories like the Extended Sports Bar and Ladder Racks for UniUte Roller Shutters bolt straight onto the side rails. Browse the full Ford Ranger accessories range.

… …

See the Manual Roller Shutter in Action

The UniUte Manual Roller Shutter is built for everyday convenience and all-weather protection.

Manual roller shutter for Nissan Navara NP300 2015-2025 — installed on red ute | UniUte

Frequently Asked Questions

Will this manual roller shutter fit my ute?

Yes. Each manual roller shutter is custom-designed for a specific ute model and year.

Every kit includes vehicle-specific side rails and mounting hardware to ensure a precise, factory-style fit.

👉 Always confirm your Year / Make / Model using the compatibility checker above the Add to Cart button.

Can I install the roller shutter myself?

Yes. All UniUte manual roller shutters are designed for DIY installation.

  • Pre-assembled shutter unit
  • Model-specific brackets
  • Step-by-step installation instructions included

No drilling, cutting, or specialist tools are required for most vehicles.

Is the manual roller shutter weatherproof?

Yes. Our manual roller shutters are engineered for Australian conditions.

  • Dual-seal side tracks
  • Integrated water drainage system
  • Tight slat interlock design

This helps keep your tub dry and protected during rain and everyday driving.
(Like all ute covers, extreme weather may allow minimal moisture ingress.)

Can I still use my sports bar or tub liner?

Compatibility depends on your vehicle and accessory type.
Most under-rail tub liners are compatible. For sports bars and accessories, check the product description or contact our team.

Customer Reviews

Overall rating: 4.9 / 5 from 34 reviews.

Chucked a roller shutter on the Navara NP300 — what a ripper! Fits spot on, smooth to open and close, and keeps all my tools dry and secure. Looks the part too, gives the ute a clean, tough finish. Absolute must-have if you use your tray every day.

John A. 5/5 Verified

Roller Shutter For Nissan Navara NP300 2015-2025 Gen2 Manual Cover

this purchase was about 4yrs ago, and since had 2 other vehicles. install was a little fiddley to get everything perfectly symmetrical so the shutter closed (but then no way to tighten the bolts in that position with the shutter closed) so basically i had to close the shutter whilst inside the closed tray with the socket wrench and a torch. tighten everything in the dark, then have someone outside the ute to open the shutter to let me out. easy for me, but not for everyone. also a number of adjustments of the recoil speed, but that adjuster is very difficult to locate with only feel by hand, wedged between the roller and the ute tray wall. when i first installed it, the shutter recoiled too hard and broke the plastic cog inside the unit. I got a replacement cog under warranty, but that meant uninstalling, completely disassembling, replace broken cog, completely reassembling, then installing a 2nd time. took about 4hrs.

Marc S. 4/5 Verified

Black Roller Lid Shutter For Mercedes-Benz X-Class 2018-2019

Select your vehicle
Search
Clear filters

… …