5% off your first order

WELCOME5
1 16
SKU: RC1-KT

HERO Lid Manual Roller Shutter for KIA Tasman 2025+

Fits KIA Tasman 2025+
$451.00 off
New arrival
$1,249.00 AUD $1,700.00

HERO Lid Manual Roller Shutter for KIA Tasman 2025+ is backordered and will ship as soon as it is back in stock.

Pickup & fitment available at UniUte Store 37A Capella Crescent, Moorabbin, VIC

Usually ready in 2 hours
Vehicle FitmentKIA Tasman dual cab 2025+
InstallationSix mounting brackets · drain hoses
Tub LinerRemove over-rail liner
Sports BarsCheck compatibility before ordering
Fitting GuideView fitting guide (PDF) ↗

HERO Lid Manual Roller Shutter for KIA Tasman 2025+

Give your KIA Tasman a clean, practical tub cover with the HERO Lid manual roller shutter. Its retractable aluminium design provides convenient access to the load area without lifting a full hard lid or relying on an electric motor. A great option for everyday use, work gear and weekend trips.

Features

  • Retractable aluminium shutter — roll the slatted cover into its front housing whenever you need open tub space.
  • Manual operation — straightforward access without electrical wiring or remote controls.
  • Integrated locking — secure the cover in the closed position.
  • Water drainage system — channels and drain hoses help direct water away from the tub.
  • Rear-panel LED lighting — useful for finding equipment after dark.
  • Tailored to the Tasman — vehicle-specific side rails and mounting components.

Fitment

Designed for the KIA Tasman dual cab 2025+ with the standard factory tub. If your Tasman has a factory sports bar or an over-rail tub liner, contact UniUte to confirm compatibility before purchase.

Complete your Tasman setup

Compare the KIA Tasman electric roller shutter or browse KIA Tasman accessories for other ways to upgrade your ute.

… …

Frequently Asked Questions

Will this manual roller shutter fit my ute?

Yes. Each manual roller shutter is custom-designed for a specific ute model and year.

Every kit includes vehicle-specific side rails and mounting hardware to ensure a precise, factory-style fit.

👉 Always confirm your Year / Make / Model using the compatibility checker above the Add to Cart button.

Can I install the roller shutter myself?

Yes. All UniUte manual roller shutters are designed for DIY installation.

  • Pre-assembled shutter unit
  • Model-specific brackets
  • Step-by-step installation instructions included

No drilling, cutting, or specialist tools are required for most vehicles.

Is the manual roller shutter weatherproof?

Yes. Our manual roller shutters are engineered for Australian conditions.

  • Dual-seal side tracks
  • Integrated water drainage system
  • Tight slat interlock design

This helps keep your tub dry and protected during rain and everyday driving.
(Like all ute covers, extreme weather may allow minimal moisture ingress.)

Can I still use my sports bar or tub liner?

Compatibility depends on your vehicle and accessory type.
Most under-rail tub liners are compatible. For sports bars and accessories, check the product description or contact our team.

Customer Reviews

Overall rating: 4.9 / 5 from 37 reviews.

Chucked a roller shutter on the Navara NP300 — what a ripper! Fits spot on, smooth to open and close, and keeps all my tools dry and secure. Looks the part too, gives the ute a clean, tough finish. Absolute must-have if you use your tray every day.

John A. 5/5 Verified

Roller Shutter For Nissan Navara NP300 2015-2025 Gen2 Manual Cover

this purchase was about 4yrs ago, and since had 2 other vehicles. install was a little fiddley to get everything perfectly symmetrical so the shutter closed (but then no way to tighten the bolts in that position with the shutter closed) so basically i had to close the shutter whilst inside the closed tray with the socket wrench and a torch. tighten everything in the dark, then have someone outside the ute to open the shutter to let me out. easy for me, but not for everyone. also a number of adjustments of the recoil speed, but that adjuster is very difficult to locate with only feel by hand, wedged between the roller and the ute tray wall. when i first installed it, the shutter recoiled too hard and broke the plastic cog inside the unit. I got a replacement cog under warranty, but that meant uninstalling, completely disassembling, replace broken cog, completely reassembling, then installing a 2nd time. took about 4hrs.

Marc S. 4/5 Verified

Black Roller Lid Shutter For Mercedes-Benz X-Class 2018-2019

Select your vehicle
Search
Clear filters

… …