The Mitsubishi Triton MV arrived in Australia in 2024 and quickly established itself as one of the most capable and well-equipped utes in its class. With a refined interior, improved towing and payload, and a bold new exterior, the MV has attracted strong and sustained buyer interest — and with it, a growing demand for quality accessories. This guide covers every UniUte accessory purpose-built for the Triton MV 2024+ and helps you build the right setup for your ute.
Mitsubishi Triton MV Fitment — What You Need to Know
All accessories in this guide are purpose-built for the Mitsubishi Triton MV 2024+ dual cab. The MV has different tub dimensions to the previous MQ and MR generations, so accessories from those models will not fit correctly. Always confirm you have the MV (2024+) before ordering — if in doubt, contact the UniUte team and we'll confirm fitment for you.
Roller Shutters — Security and Weatherproofing
The roller shutter is the most popular first accessory for the Triton MV. UniUte offers both manual and electric (EGen2) roller shutters engineered specifically for the MV's tub dimensions.
Interlocking aluminium slats with rubber seals lock across the full tub width — far more secure than a hard lid or tonneau. The slats retract into a compact canister at the front of the tub, giving you 100% bed access when open. T-track side rails allow ladder racks and crossbars to mount directly to the shutter.
- Manual or electric (EGen2 button open/close)
- Interlocking aluminium slats — fully weatherproof
- 100% tub access when open, lockable at any position
- 4 integrated drain channels and LED interior light strip
- T-track side rails for crossbars and ladder racks
- Clamp-on installation, no drilling required
👉 Shop the UniUte Electric Roller Shutter for Mitsubishi Triton MV 2024+
👉 Shop the UniUte Manual Roller Shutter for Mitsubishi Triton MV 2024+
Hard Lid — Tri-Fold Tonneau Cover
For a clean, flush appearance and the ability to carry load on top of the cover, the tri-fold hard lid for the Triton MV folds forward in three aluminium sections, giving you partial or full tub access. Rated to 250 kg, installs in under 10 minutes with no drilling.
👉 Shop the UniUte Tri-Fold Hard Lid for Mitsubishi Triton MV 2024+
REVOLVER Hard Rolling Tonneau Cover
The HR REVOLVER is a premium hard rolling tonneau for the Triton MV — interlocking aluminium slats that roll open from the rear, lockable at any position, fully weathersealed, and finished in matte black that suits the MV's bold exterior perfectly.
👉 Shop the REVOLVER Hard Rolling Tonneau for Mitsubishi Triton MV 2024+
Soft Tonneau Covers
UniUte offers two soft tonneau options for the Triton MV — a soft tri-fold and a soft roll-up clip-on cover. Both provide lightweight, easy-to-fold tub protection at a lower price point. Best suited for lifestyle owners who want basic protection with maximum flexibility.
👉 Shop the Soft Tri-Fold Tonneau Cover for Mitsubishi Triton MV 2024+
Fibreglass Canopy
For owners who need full enclosed height, UniUte's fibreglass canopy for the Triton MV is purpose-built to the MV's tub and body dimensions. Factory-fitted appearance, paintable surface for colour matching, full stand-up interior height, rear barn door with gas-strut assist, and sliding side windows. Compatible with canopy roof bars for additional carry capacity on top.
👉 Shop the UniUte Fibreglass Canopy for Mitsubishi Triton MV 2024+
Stainless Steel Canopy
For tradies and owners who need maximum durability, the stainless steel canopy for the Triton MV won't crack, dent, or corrode. Built to handle decades of daily hard use in Australian conditions — on worksites, farms, and anywhere that demands industrial-grade toughness.
👉 Shop the UniUte Stainless Steel Canopy for Mitsubishi Triton MV 2024+
Sliding Tray
The UniUte sliding tray for the Triton MV bolts to the tub floor and extends fully out the rear — bringing all your gear to you without climbing in. Available in 300 kg (plastic deck) and 400 kg (aluminium deck) ratings. A natural pairing with the roller shutter for tradies and 4WD tourers.
👉 Shop the UniUte Sliding Tray for Mitsubishi Triton 2024+
Tub Mat
The custom-fit tub mat for the Triton MV is cut to the exact dimensions of the MV tub including wheel arch cutouts. Heavy-duty rubber with raised edge lips to contain spills, anti-slip surface, and sidewall coverage. The baseline protection every Triton MV tub should have from day one.
👉 Shop the UniUte Tub Mat for Mitsubishi Triton MV 2024+
ProLift Tailgate Assist
The ProLift tailgate assist for the Triton MV uses a gas strut mechanism to slow the tailgate from dropping open under its own weight. Single-handed controlled lowering, bolt-on installation with no drilling, and it takes the stress off your wrists and the tailgate hinges every time you open it.
👉 Shop the UniUte ProLift Tailgate Assist for Mitsubishi Triton MV 2024+
Tailgate Central Locking
The tailgate central locking kit for the Triton MV integrates your tailgate into the central locking system — lock and unlock the tailgate from your key fob along with the rest of the vehicle. A must-have for anyone leaving gear in the tub overnight.
👉 Shop the UniUte Tailgate Central Locking for Mitsubishi Triton MV 2024+
Recommended Setups for the Triton MV
The Tradie Triton
Electric roller shutter + tub mat + tailgate central locking + ProLift. Maximum security, weatherproofing, controlled tailgate every time — the complete daily work setup.
The 4WD Triton
Electric roller shutter + sliding tray + tub mat. Pull all your recovery and camp gear out the back without climbing in, full weatherproofing, lockable at any position.
The Work Ute
Fibreglass or stainless steel canopy + tub mat + tailgate central locking. Full enclosed height for a proper work fit-out, tub protected from day one, tailgate secured.
The Lifestyle Triton
Tri-fold hard lid + tub mat + ProLift. Clean flush look, 250 kg load on top, controlled tailgate — suits a lifestyle ute perfectly.
Triton MV vs MQ/MR — Key Differences for Accessories
The MV (2024+) has a wider and longer tub than the MQ (2015–2018) and MR (2019–2024) generations. This means accessories designed for MQ/MR will not fit the MV correctly, and vice versa. If you're upgrading from an older Triton, make sure you order MV-specific products. All UniUte accessories listed in this guide are engineered for the MV only.
👉 Browse the full Mitsubishi Triton MV accessories range at UniUte
Questions about fitment or building the right setup? Contact the UniUte team in Moorabbin, VIC — we ship Australia-wide.