The BYD Shark 6 is one of the most talked-about utes to arrive in Australia in years. A plug-in hybrid dual-cab with genuine off-road capability, a spacious tub, and a price point that's turning heads across the market — it's no surprise that BYD Shark 6 searches have been surging in Australia through 2026. If you've just taken delivery or you're planning your build, this guide covers every UniUte accessory available for the Shark 6 and how to choose the right setup for how you use it.
BYD Shark 6 Fitment — What You Need to Know
All UniUte accessories listed in this guide are purpose-built for the BYD Shark 6 2025+ dual cab. They are engineered to the Shark 6's exact tub and body dimensions — not adapted from another vehicle. Fitment is precise and installation is straightforward, with all products using clamp-on mounting systems that require no drilling to the tub.
Roller Shutters — Security and Weatherproofing
The roller shutter is the most popular first accessory for any new ute, and the Shark 6 is no exception. UniUte offers both manual and electric (EGen2) roller shutters specifically engineered for the BYD Shark 6 tub.
The interlocking aluminium slat design locks across the full width of the tub — significantly more secure than a hard lid or tonneau cover. When open, the slats retract into a compact canister at the front of the tub, giving you 100% bed access. Side T-track rails allow you to run crossbars or ladder racks directly off the shutter.
The electric EGen2 version opens and closes with a button — particularly useful on a vehicle like the Shark 6 where the PHEV technology already sets a premium, tech-forward expectation.
- Interlocking aluminium slats with rubber seals — fully weatherproof
- 100% tub access when open
- Lockable at any position
- 4 integrated drain channels and LED interior light strip
- T-track side rails for crossbars and ladder racks
- Manual or electric (button open/close)
- Clamp-on installation, no drilling required
👉 Shop the UniUte Electric Roller Shutter for BYD Shark 6 2025+
👉 Shop the UniUte Manual Roller Shutter for BYD Shark 6 2025+
Hard Lids — Tri-Fold and Quad-Fold
For owners who want a clean, flush appearance and the ability to carry load on top of the cover, UniUte offers both tri-fold and quad-fold hard lids for the BYD Shark 6.
Hard lids are rated to 250 kg — you can stand on them, stack gear on top, or load them with camping equipment. The aluminium panels fold forward in sections, giving you partial or full tub access depending on what you need. They sit flush with the tub rails for a factory-fitted appearance that suits the Shark 6's premium styling.
👉 Shop the UniUte Tri-Fold Hard Lid for BYD Shark 6 2025+
👉 Shop the UniUte Quad-Fold Hard Lid for BYD Shark 6 2025+
REVOLVER Hard Rolling Tonneau Cover
The HR REVOLVER is a premium hard rolling tonneau cover made from interlocking aluminium slats that roll open from the rear of the tub. It combines the security of a roller shutter with the low-profile aesthetics of a tonneau cover — lockable at any position along the bed, fully weathersealed, and finished in a matte black that suits the Shark 6's exterior perfectly.
👉 Shop the REVOLVER Hard Rolling Tonneau Cover for BYD Shark 6 2025+
Soft Tri-Fold Tonneau Cover
If you want basic tub protection at a lower price point, the soft tri-fold tonneau cover for the BYD Shark 6 gives you lightweight, easy-to-fold coverage that keeps dust and light rain out. It folds back in thirds for quick tub access and removes completely when you need the full bed open. Best suited for lifestyle owners who want flexibility over security.
👉 Shop the UniUte Soft Tri-Fold Tonneau Cover for BYD Shark 6 2025+
Fibreglass Canopy
For owners who need full enclosed height — whether for a tradie work fit-out, a camper setup, or just maximum cargo security — the UniUte fibreglass canopy for the BYD Shark 6 is purpose-built to the Shark 6's tub dimensions and body lines.
Fibreglass canopies offer a factory-fitted appearance that other materials can't match, with a paintable surface that can be colour-matched to your Shark 6. Full stand-up height, rear barn door with gas-strut assist, and sliding side windows for ventilation and tool access.
👉 Shop the UniUte Fibreglass Canopy for BYD Shark 6 2025+
Stainless Steel Canopy
For owners who need maximum durability — tradies, farmers, and anyone operating in harsh conditions — UniUte also offers a stainless steel canopy for the BYD Shark 6 2025+. Stainless steel won't crack, dent, or corrode, and holds up to decades of daily hard use. The trade-off is weight and a more industrial appearance compared to fibreglass, but for worksite durability it's the top choice.
👉 Shop the UniUte Stainless Steel Canopy for BYD Shark 6 2025+
Sliding Tray
The BYD Shark 6 has a generous tub, and a sliding tray makes the most of it. Bolt onto the tub floor and pull the full tray out the back — everything comes to you without climbing in. Available in 300 kg (plastic deck) and 400 kg (aluminium deck) ratings. A popular pairing with the roller shutter for tradies and 4WD owners who want fast, easy access to heavy gear.
👉 Shop the UniUte Sliding Tray for BYD Shark 6 2025+
Swing-Out Tool Box
The swing-out tool box mounts to the side of the Shark 6's tub below the rail and swings open 180 degrees for instant access to tools and equipment. Lockable, weatherproof, and side-mounted — your tub floor stays completely clear for materials and other gear. Works with roller shutters, hard lids, and tonneau covers.
👉 Shop the UniUte Swing-Out Tool Box for BYD Shark 6 2025+
Recommended Setups for the BYD Shark 6
The Tech-Forward Tradie
Electric roller shutter + swing-out tool box. Button-operated cover, instant tool access, full weatherproofing — suits the Shark 6's PHEV character and keeps your gear secure overnight.
The 4WD Tourer
Electric roller shutter + sliding tray. Pull all your recovery and camp gear out the back without climbing in. Full weatherproofing, lockable at any position, tray rated to 400 kg.
The Work Ute
Fibreglass or stainless steel canopy + swing-out tool box. Full enclosed height for a proper work fit-out. Fibreglass if you want the colour match; stainless if you need the durability.
The Weekend Warrior
Quad-fold hard lid. Clean flush look, 250 kg load on top, fold back what you need. Simple, versatile, suits a lifestyle ute.
Why the BYD Shark 6 Is One to Watch
The Shark 6 is Australia's first mainstream PHEV ute — combining a twin-turbo petrol engine with an electric motor for a combined output that rivals diesel competitors, with the added benefit of electric-only driving for short commutes and worksites. Tow rating, payload, and off-road credentials stack up well against established players like the Hilux and Ranger. And with search interest surging nearly double in early 2026, it's clear Australian buyers are taking it seriously.
UniUte is one of the first accessory suppliers in Australia to offer a full purpose-built range for the Shark 6. Every product is engineered to the exact tub dimensions — not adapted from another vehicle.
👉 Browse the full BYD Shark 6 accessories range at UniUte
Questions about fitment or building the right setup for your Shark 6? Contact the UniUte team in Moorabbin, VIC — we ship Australia-wide and can help you choose the right combination for your vehicle and how you use it.